Applications:
1. Electric vehicles: Electric bike, electric golf trolley, electric scooter, skating board, two wheeler, etc
2. Telephone switchboard, electric equipments, power instruments and meters
3. Uninterrupted power source (UPS) for computer, Emergency Application, Medic devices
4. Power transmission and transformer station, switch control, and accident light
5. Fire fighting, safety device, and alarm monitoring
6. Automatic office system
7. Radio communication system
8. Emergency lighting and car/ship starting system
9. Portable electric appliances and mining system
10. Traffic and navigation signal lamp
Quanlity Warranty:
Electric Car Seal Lead Acid Battery
The quality guarantee is 12 months from our manufacture date or B/L date. We will replace any defective batteries by new ones.
Your car battery is the heart of your car and if it's not beating with power, your car will only sit still. So take care of your battery and it will keep your car running for a long time. There are some fairly simple tips for taking care of your car battery.
Test Your Battery
· Regularly test your battery, particularly before a long trip and after it's been recharged. You don't want the battery to fail to start your car when you are far from home.
Park Your Car in a Garage
· An insulated garage helps keep your battery warm in the winter. This means it will be easier for your battery to start your car. If you don't have an insulted garage, then insulate the battery itself with a blanket.
Keep the Battery Clean
· When you test your battery, you might also want to clean it. This means removing the clamps and cleaning off the dirt and grease from the clamps and terminals. You want a clean connection so as not to weaken the charge. Clean the battery case itself with baking soda dissolved in warm water. Dirt can conduct electricity and discharge electricity.
Check the Fluid Levels
· When you clean your battery, check the fluid level as well. If it is low, add distilled water to top it off. Keeping the fluid levels full, will help extend the life of the battery. If you don't see any fluid, you may want to replace the battery. The lack of fluid is an indicator that the battery is near the end of its life.
Secure the Battery
· Secure the battery in the mounting bracket. A loose battery can slide around and become damaged. It might also cause a short circuit in some cases.
Why you choose us?
Professional OEM&ODM service
Outstanding design and R&D team
Best quality control QC checking points
Small quality order/trial order accepted
Excellent quality and 24 hours after-sales service
Quality guarantee 1-3yrars varies from different series
Diversified payment terms TT, L/C,
Protection of your sales area, ideas of design and your privivate information
Welcome to inquiry and factory
| Product Specification |
| No. |
Item |
Rated Performance |
Remark |
| 1 |
Model: |
KXD-12V-20AH |
KXD18650R4S13P |
| 2 |
Rated Capacity |
Typical |
20.8Ah |
Standard discharge ( 0.2C C 5 A) after Standard charge |
| Minimum |
20.8Ah |
| 3 |
Nominal Voltage |
12V |
Mean Operation Voltage During Standard Discharge After Standard Charge |
| 4 |
Over discharge protection voltage |
9.0V±0.05V |
Discharge Cut-off Voltage |
| 5 |
The overcharge protection voltage |
14.6V±0.05V |
Charging voltage |
| 6 |
AC (1KHz) Impedance New Cell Max.(mW) |
≤ 160 mΩ |
|
| 7 |
Maximum Continuous Charge Current |
≤10A |
|
| 8 |
Maximum Continuous Discharge Current |
≤20A |
|
| 9 |
Maximum Pulse discharge current |
≤65A |
|
| 10 |
Operation Temperature Range |
Charge: 0~45 C |
60±25%R.H. |
| Discharge: -20~60 C |
Bare Cell |
| 11 |
Storage Temperature |
Less than 1 year: -20~25 C |
60±25%R.H. |
| Range |
Less than 3 months: -20~40 C |
at the shipment state |
| 12 |
Storage Temperature |
Less than 30 Days: -25 C~45 C |
60±25%R.H. |
| Range |
Less than 90 Days: -25 C~30 C |
at the shipment state |
| 13 |
Weight |
Approx 2.7kg |
Bare Cell |
| 14 |
Cycle Characteristic |
2000 times |
100% DOD, the residual capacity is no less than 70% of rated capacity at 0.5C rate. |
| 15 |
PCB |
to be placed on top - as per spec |
|
| 16 |
Export |
two wires |
Charging and discharging the same port. |
| Red & Black are used to charge the battery. |
| Red & Black are used for the load. |
| 17 |
Cell Dimension |
Length: Max. 210mm |
Bare Cell |
| Width: Max. 95mm |
| Thickness: Max. 75mm |
About Eastar Battery
Shenzhen Eastar Battery Co., Ltd was set up as a manufacturer of various batteries in 1997.Our main products include dry batteries ( carbon & alkaline), lead-acid batteries(General batteries, Auto batteries), Ni-MH/Ni-CD batteries and packs, Lithium batteries ( Li-ion, Li-PO).
Quality is our life
As a battery manufacturing group, we have separate factory located in Guangzhou, Shenzhen and Xingfeng for different battery types.We invested much on the advanced production facilities and testing equipments.We have a powerful R&D and skillful worker group.Based on ISO9001, we built up a complete quality control system.
The best services to you
1 year Warranty
ODM & OEM service
24 hours online service
Payment & Shipping
Exhibition
FAQ
1.Q:Can you accept OEM and ODM Service?
A:Yes, we supply OEM&ODM service as clients requirement.
2.Q:Can we get samples for test?
A:Yes, we offer sample, but free samples are not available at beginning.
3.Q:What's your payment term?
A:TT, L/C, West Union, Paypal etc.
4.Q:What's your warranty for products?
A:Generally speaking, it's one year's warranty, for quality problems, we will send you a new one.
5.Q:How long will be the delivery?
A:Usually delivery in 7-15 days, but could be change according to the quantity or other things.
6.Q:How do you control your product quality.
A:All batteries have 10 steps testing during the whole production.
Audited Supplier 
){kind=link}